ben-e-bike TWENTYFOUR E-POWER PRO Скачать руководство пользователя страница 38

Страница: 38 / 63

38 BEN-

If you trust your child to clean and care, explain how it

your child the risk of injury when cleaning and maintaining.

REQUIRED TOOLS

•

cleaning cloths

•

mild, warm soapy water

•

a soft cleaning sponge

•

a soft brush

•

care and preservative agent and universal oil.

If necessary, consult your specialist dealer for suitable care and preservatives.

CLEANING

•

Regularly clean the BEN-E-BIKE

•

Wipe all surfaces and components with a damp cloth.

•

To moisten the cloth, use a mild soapy water or just water.

•

After cleaning, wipe all surfaces

•

Preserve painted surfaces and metallic surfaces on the frame at least every six months.

CARE INSTRUCTIONS FOR THE CHAIN

Incorrectly selected greases, oils and care products can damage the components

•

Consult your dealer for the use of

•

Do not use water or a chemical brake cleaner or thinner to clean the chain.

•

Do not use gun oil or rust remover spray.

•

Remove dirt on the bicycle chain with a clean, slightly oiled cleaning cloth.

•

Remove dirt on the sprockets and chainrings with a small, soft brush.

•

Oil the bicycle chain after cleaning, after driving in the rain or after 250 km with some silicone oil.

•

For removing persistent stain, contact your dealer.

-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH
Stuttgarter Str. 72
D-78628 Rottweil

If you trust your child to clean and care, explain how it has to clean and maintain the BEN

your child the risk of injury when cleaning and maintaining.

care and preservative agent and universal oil.

ult your specialist dealer for suitable care and preservatives.

BIKE.

Wipe all surfaces and components with a damp cloth.

To moisten the cloth, use a mild soapy water or just water.

After cleaning, wipe all surfaces and components dry.

Preserve painted surfaces and metallic surfaces on the frame at least every six months.

Incorrectly selected greases, oils and care products can damage the components.

se of grease, oil and conditioners for the chain.

Do not use water or a chemical brake cleaner or thinner to clean the chain.

Do not use gun oil or rust remover spray.

Remove dirt on the bicycle chain with a clean, slightly oiled cleaning cloth.

move dirt on the sprockets and chainrings with a small, soft brush.

Oil the bicycle chain after cleaning, after driving in the rain or after 250 km with some silicone oil.

, contact your dealer.

BIKE INSTRUCTION MANUAL

www.ben-e-bike.net
[email protected]

the BEN-E-BIKE. Explain to

Preserve painted surfaces and metallic surfaces on the frame at least every six months.

Oil the bicycle chain after cleaning, after driving in the rain or after 250 km with some silicone oil.

Содержание TWENTYFOUR E-POWER PRO
































































Результаты поиска

Содержание TWENTYFOUR E-POWER PRO

Отзывы:

Бренды по названию

Популярные бренды

ben-e-bike TWENTYFOUR E-POWER PRO, Руководство пользователя

Результаты поиска

Содержание TWENTYFOUR E-POWER PRO

Отзывы:

Бренды по названию

Популярные бренды