37
en
es
fr
36
Example – Sleep Program
(2 B.BODY applicator modules connected, both simultaneously in operation)
Example – using light application
(B.LIGHT connected on port A2)
Light application
•
Designate the applicator module [A1/A2],
by repeatedly pressing the [SET] key.
•
Select the desired light intensity by selecting
a number from [1] through [10].
•
Start the program with [START/STOP].
Special application – Sleep Program
•
Activate the Sleep Program by pressing
the [S] key. 7:00 appears on the display
(= 7 hours).
•
Select the desired duration
(6, 7 or 8 hours).
•
Designate the desired application
module [A1/A2] by repeatedly
pressing [SET].
•
Start the program with
[START/STOP].
Begin the light application at intensity 6 (for 2 mins) and increase
by one intensity level every 2-3 days, and increase the length of
use by 2 minutes.
The duration of the application at level 10 is usually over 8 min-
utes. However, for those with very sensitive skin, lower intensity
levels can also be selected.
Please note that the set intensity level (only
for B.BOX Classic)
will not switch off auto-
matically after 2, 4 or 6 minutes.
You must stop application manually at the
proper time according to the recommended
application times listed above.
Always use the safety glasses supplied!
The display screen will fade
after 90 seconds, so as not to
disrupt your sleep. It can be
reactivated at any time by
pressing any key once.
