29
en
es
fr
28
2
1
4
3
Basic position, recommended
when using the wall mount.
Position 1 and position 2, recommended
for table application at different angles.
1
Use only approved BEMER accessories.
Suitable for software updates and approved BEMER accessories.
2
Applies for B.BOX Professional only.
Maintenance interface
1
1
Memory card slot
2
Communication interface
1 2
3
Connections for the applicator modules (A1 and A2)
4
Connections – B.BOX
Start-up procedure – B.BOX
The plug on the power cord is the AC mains connection cable
and must remain readily operable. To completely disconnect
this apparatus from the AC mains, disconnect the power supply
cord plug from the AC receptacle.
Turn the B.BOX over and connect it to the adapter. Place the
product on a stable surface and plug the adapter into the
power supply.
A short press on the power button switches the product on,
and a longer press will switch it off.
After 2 minutes of inactivity, the control unit
will automatically switch off.
