Technical documentation
Rev. 02
Reactive Factor Controller CX plus
24
9.2
INFO (step database)
The switching cycles, the operating hours, the step type / status, the current step power and the step
power with regard to the initial power
(in %) are displayed in the “INFO” menu for each step. With
these data it is possible to draw conclusions about the condition of the system and the condition of the
individual steps.
NOTE:
The current step size (in kVar) is only displayed, if the current transformer factor has been set
in the “SETUP” menu.
The step power with regard to the initial power (in %) is only displayed, if the step identification has
been completed or if the step size was entered manually (see chapter Step identification)
Select the
step number
with
.
Select the step
with .
Select the values
with
.
1.00
i
INFO
INFO
CC
25
kVar
Display of the step size
is only active, if the CT has
been set, otherwise ----
1 2 3 3 4 max.
1
2
3
4
max.
1.00
i
MANUAL
INFO
98
%
Current step value in % with
regard to the initial value.
Is only displayed, if the step
identification has been
completed or if the step size
was entered manually.
Otherwise, only ---- is
displayed.
1
2
3
4
max.
1
2
3
4
max.
1.00
i
SETUP
INFO
OC
808
Switching cycles
of the step
1
2
3
4
max.
1
2
3
4
max.
1.00
i
ALARM
Auto
Step type / status:
AUTO: Step is active
FOFF: Step is deactivated
FON: Step is always on
Flty: Step is defective
1
2
3
4 max.
OPh
342
h
Operating hours
of the step
1
2
3
4
max.
