Belshaw Brothers 21269-10 Скачать руководство пользователя страница 11

Страница: 11 / 46

Belshaw Adamatic Bakery Group

•

[email protected]

•

1-800-BELSHAW • (+1) 206.322.5474

MN-1147EN

718L/724/734FG Gas Fryers OM

WARNING

Thoroughly clean and dry the floor if

cleaning solution is spilled. Liquid on the

floor can cause serious injury or loss of life.

Rinsing

1. Pour clean water into the kettle, up to the

normal level of the shortening. If the

cleaner you have used requires that you add

a neutralizer, do so now.

CAUTION

To avoid severe damage to the kettle, never

turn on the heat unless the heat tubes are

completely covered by liquid.

2. Start up the fryer. Set the temperature

controls at 200

F/93

C. Leave the water at

this temperature for 5-10 minutes.

3. Shut off the fryer. Allow the water to cool

to 100

F/38

4. Place a large metal container under the drain

valve.

WARNING

Do not use plastic containers. If the water

is not cool enough, the containers will melt;

possibly causing you to be burned, and

causing cleaning solution to get on the

floor.

5. Open the drain valve and allow the water to

drain into the container.

6. Watch the container to make sure the water

does not overflow the container. If the

container becomes full, close the drain

valve, put another large metal container

under the drain valve, and open the drain

valve again.

WARNING

Do not allow the water to overflow the

containers. Water will get on the floor, and

if the water is not cool enough, you may be

burned.

7. When the draining is complete, close the

drain valve.

8. Carefully carry the container(s) to the sink

and slowly pour the water into the sink.

WARNING

Thoroughly clean and dry the floor if water

is spilled. Water on the floor can cause

serious injury or loss of life.

9. Dry the kettle, drain valve, and burner tubes

thoroughly. Make sure there is no water in

the drain tube.

WARNING

Dry all parts of the fryer thoroughly.

Failure to dry the fryer and kettle

completely will cause an eruption.

Shortening will overflow the sides of the

fryer and may result in fire, injury, or

death.

Содержание 21269-10









































Результаты поиска

Содержание 21269-10

Отзывы:

Похожие инструкции для 21269-10

Бренды по названию

Популярные бренды

Belshaw Brothers 21269-10, Руководство оператора

Результаты поиска

Содержание 21269-10

Отзывы:

Похожие инструкции для 21269-10

Бренды по названию

Популярные бренды