[6] INSTALLATION
6-1. Attach the light assembly to the light pole
Feed the wire harness coming from the balance arm joint through the light pole. Insert the balance arm joint
of the light into the light pole. Fasten with two M6 x 12mm screws.
6-2. Feed the light assembly wire harness through the swing arm
Feed the light assembly wire harness through the swing arm and pull the end of the harness from the
lower end of the swing arm. Mount the light assembly onto swing arm.
Light Pole
Balance Arm Joint
Light Assembly
Light assembly wire harness
M6×12mm
Light Arm
Swing Arm
Pull light assembly wire harness
from the light through swing arm
6-3. Attach the switch box
Attach the switch box onto the swing arm with two screws M4 x 8mm.
Fix the Green/Yellow line from transformer wire harness together with same screw as shown in figure.
-3-
-3-
Greem
／
Yellow
Transformer wire harness
Light assembly wire harness
Switch Box
M4 x 8 mm
