[9] REPLACEMENT OF THE BULB
9-2. Replacement of the bulb
(1) Disconnect the connectors. See Fig.3
(2) Push the plastic-coated parts of the bulb retaining spring, and remove it from the hook. See Fig.4
Hook
< Fig.3 >
< Fig.4 >
Pull off
Flat connector
Plastic coated
Bulb retaining spring
(3) Remove the bulb. See Fig.5
< Fig.5 >
Bulb
Make sure the power supply is turned off.
Halogen bulb and surrounding parts be hot immediately after the lamp goes off. Wait until they get cool down.
Do not touch glass with bare hand. Halogen bulb surface must be clean. Oil or body moisture will affect
bulb span of life. If glass surface is touched, clean with alcohol.
IMPORTANT
CAUTION
< Fig.1 >
< Fig.2 >
Light bulb cover fixing screw
Coin
Light bulb cover
Reflector cover
Cut out
Reflector cover
fixing gap
9-1. Removal of the reflector cover
(1) Turn the light bulb cover fixing screw counterclockwise by 90 degrees with a coin.
( From mark to mark. See Fig.1)
(2) Remove the reflector cover by pulling it toward you. See Fig.2
-9-