(2) As illustrated below, place the wire harness inside the guide. The part with the cable tie should be
inside the box. Lead all the wires underneath the switch, and connect the connectors (3 pins) from the
transformer wire harness and the mode selection switch. See [2] Wiring diagrams.
6-4. Attaching wire harness from light assembly, transformer assembly and the switch box
(1) Attach the connectors of the light assembly wire harness and transformer wire harness.
Connector(3 Pins)
Guide
Cable tie
Transformer wire harness
Mode selection switch
(3) As illustrated below, place the Light Assembly Wire Harness inside the cable guide. The part with the
cable tie should be inside the box. Make sure that the Light Assembly Wire Harness should be above that
from the transformer assembly.
Connect the connectors (5 pins) of the wire harnesses.
Also connect connectors (2 pins) of the wire harnesses.
See [2] Wiring diagrams.
Transformer wire harness
Connector(2 Pins)
Connector(5 Pins)
Guide
Cable tie
Light assembly wire harness
-4-
-4-
Transformer wire harness
Light assembly wire harness