Belling 152A, Руководство по установке пользователя

Страница: 9 / 48

CONNECTING TO THE GAS SUPPLY
7
The cooker is designed to match the
depth of standard 600mm worktops.
An adaptor backplate should, there-
f o re, be fitted within the 400 x
250mm shaded area shown to allow
the cooker to be pushed fully to the
wall.
If a forward facing backplate is used,
it must be chased to the wall.
Means of isolation shall be provided
at the shut off point by either an
approved quick connect device or a a
Type 1 manual shut off valve. The out-
let of the quick connect device shall be
at, or below, the horizontal position Connection to the cooker should be
made using an AGA certified hose
assembly and regulator (Natural Gas
only).
Note:
Maximum length of hose = 900mm.
The temperature rise of areas at the
rear of the cooker that are likely to
come into contact with with the flexible
hose do not exceed 70˙C.
08 27095 00- 152A CC 14/6/04 10:59 am Page 9