Belling 152A, Руководство по установке пользователя, Страница: 12 / 48

CONNECTING TO THE ELECTRICAL SUPPLY
10
Connecting The Cooker
For your own safety we recommended
that your cooker be installed by a com-
petent person.
The cooker should be installed in
a c c o rdance with AS/NZS 3000:
2000.
Warning! This cooker must be
earthed.
The cooker must be connected to the
correct electrical supply as stated on
the rating plate, through a suitable
cooker control unit incorporating a
double pole switch having a contact
separation of at least 3mm in all poles,
adjacent to(but not above) the cooker.
We recommend the cooker circuit be
rated to 45 amps with a minimum of
30 amps.
We recommend that 6m
2 PVC insulat-
ed twin and earth cable is used to con-
nect the cooker to the cooker control
unit, the minimum size of cable that
can be used is 6mm
2
twin and earth
the maximum size is 10mm 2 twin and
earth.
Important
For access to the mains terminal block,
for supply cable connection, it is nec-
essary to remove the mains terminal
cover, located at the lower right hand
side of the rear panel. No part of the
appliance will operate unless the main
control unit is switched
ON .
Allow sufficient cable for the cooker to
be pulled out for cleaning, but do not
let it hang closer than 25mm (1”) to
the floor. The cable can be looped if
necessary, but make sure that it is not
kinked or trapped when the cooker is
in position.
Before Cooking
Before you cook for the first time, we
recommend that you switch on each
element in turn to burn off any odours
remaining from manufacture.
08 27095 00- 152A CC 14/6/04 11:00 am Page 12