SECTION
573-127-703
2.
BASIC UNITS
2.01
Clutch Mechanism
Note
1:
Remove the transmitter distributor
from its base before making a complete re
adjustment or spring tension checks.
Note
2:
Adjustments (A) and (B) are made
at the factory and should not be disturbed
unless good reasons exist that the require
ments are not met.
SHOE LEVER
STOP LUG
(A) CLUTCH SHOE LEVER SPRING
To Check
Invert unit and rotate main shaft until
clutch shoe lever and stop lug are up.
With clutch engaged, hold cam disc to
prevent turning.
Requirement
Min
15
oz---Max
20
oz
Page
4
CLUTCH
DRUM
CAM
STOP-LUG
to move shoe lever in contact with stop
lug.
(Where set is equipped with tape slack
mechanism)
Min
9
oz---Max
11
oz
(B)
CLUTCH SHOE SPRING
To Check
Remove the clutch from the main shaft.
With the clutch drum removed, hook
spring scale as shown.
Requirement
Min
3
oz---Max
5
oz
SHOE SPRING
PRIMARY SHOE
to start primary shoe moving away
from secondary shoe at point of contact.
