Bellcall Digital Door Entry System
PD-083 Issue 3A
Installation and Operating Manual
Page 44 of 46
Diagram N – ACT Interconnections
ACT 1000/2000/3000 Proximity Controller
ACT 100e Proximity Extender
Notes
1. Connect the lock release or Maglock using the ACT Manuals.
2. Leave the BSD controller set to Fail Secure regardless of the type of release used.
3. A normally open exit button can still be fitted to the ACT controller in addition to the
bell
issimo
wiring.
4. If the 2 units are not sharing a power supply, then a connection from BSD controller
12V - to ACT 0V will be required.
5. Look for the notes on the ACT installation diagram concerning the use of links when
the door contact is not used and when a power supply without power fail is not used.