background image

5

 ADMINISTRATOR GUIDE

7. 

In case a connected device is rejected in the 
console port group the user will have the 
following visual indications:

a. 

When connecting a non-qualified keyboard, the 
keyboard will be non-functional with no visible 
keyboard strokes on screen when typing.

b. 

When connecting a non-qualified mouse, the 
mouse will be non-functional with mouse cursor 
frozen on screen.

c. 

When connecting a non-qualified display, the 
video diagnostic LED will flash green once and 
turn off, and video will not display on monitor.

d. 

When connecting a non-qualified CAC reader 
(on models with a dedicated CAC port), the 
USB LED will flash green once and turn off, CAC 
reader will be inoperable.

8. 

Do not connect product to computing devices:

a. 

That are TEMPEST computers

b. 

That include telecommunication equipment

c. 

That include frame grabber video cards

d. 

That include special audio processing cards

9. 

The product has a remote-control port on 
the back panel labeled remote.  This port 
can be used with various remote controls 
and if connected the operation must be 
verified and secured.

10.

 Important! After re-allocating computers to 

channels, it is mandatory to power cycle the 
product, keeping it powered OFF for more 
than 1 minute.

11. 

The product log access and administrator 
configuration options are described starting 
in the next section.

12. 

Administrator authentication session is 
terminated only when unit is power-cycled. 
Once all administrative tasks have been 
completed, power cycle the unit to exit 
administrator-authenticated mode.

User Guidance & Precautions

Reporting Belkin Product Security Vulnerabilities:

1.  If the product’s anti-tamper evidence tape appears disrupted or if all channel-select LEDs flash continuously, please 

remove product from service immediately and contact Belkin Technical Support.

2.  If you are aware of potential security vulnerabilities with any Belkin secure KM/KVM product, we encourage you to 

contact us immediately at [email protected] or our technical support line at +1-800-282-2355.

Note: The [email protected] email address is not intended for technical support.

Содержание Secure KVM - NIAP PP4.0
















Отзывы: