7
ADMINISTRATOR GUIDE
1.
Connect keyboard, mouse and one USB
cable between the KVM and the computer
and power up the product. Note that the
display may or may not be connected
through the product.
2.
Select channel #1 on the product and open
Notepad on the computer connected to
channel #1.
3.
Using keyboard, type CTRL (Left), CTRL
(Right), t to enter Admin Mode.
4.
Text will appear in Notepad asking for a
user name.
5.
The default user name is: “admin1234”. This
account ID cannot be changed or deleted.
6.
The default first device logon password is:
“1234ABCDefg!@#”
7.
At first logon the administrator must set a
new, non- default, password.
The new password must be at least:
a.
8 characters long but not longer than 24
characters;
b.
Have at least one capital and one lower-case
letter
c.
Have at least one number;
d.
Have at least one symbol.
8.
Password must be typed twice to confirm.
9.
Password may be changed at any time.
10.
RFD will not reset the user name and
password!
11.
If the user name or password is forgotten –
contact Belkin support.
12.
Note: The unit will enter tamper mode after
4 failed attempts to login. To reset, power
cycle the unit and attempt again.
13.
Additional administrative user accounts
can be created from the terminal menu (up
to 8 more in addition to the default admin
account per unit).
a.
Admin names need to include at least 1 capital
and 1 lower case letter and 1 number.
Administrator Setup / Log On
3
1
2
Содержание Secure KVM - NIAP PP4.0
Страница 15: ...LNKPG 00666 Rev B00 ...
