4
ADMINISTRATOR GUIDE
Please read the following User Guidance & Precautions before using the product:
1.
As the product powers-up it performs a self-
test procedure. In case of a self-test failure,
including jammed buttons, the product will be
Inoperable. A Self-test failure will be indicated
by the following LED behavior:
a.
Unit’s anti-tamper mechanism has been activated:
Unit will rapidly and continuously switch channels
b.
Jammed button or other failure to boot: Unit will
slowly switch between channels.
To exit a self-test failure state, power cycle the
unit. If the problem persists, contact your system
administrator or Belkin technical support.
2.
Product power-up and Reset to Factory Defaults:
a.
By default, after product power-up, the active
channel will be computer #1, indicated by the
applicable front panel button LED being lit.
b.
Product restore to factory defaults (RFD) function
is available by pressing the following keyboard key
sequence: Left CTRL | Left CTRL | f11 | r.
c.
RFD action will be indicated by a single click
d.
When the product reboots after RFD, the console
keyboard and mouse will be mapped to the active
channel #1 and default settings will be restored,
erasing all user-set definitions.
3.
The appropriate usage of peripherals (e.g.
keyboard, mouse, display, authentication
device) is described in detail in the User
Manual’s appropriate sections. Do not
connect any authentication device with an
external power source to the product.
4.
For security reasons and per NIAP
and Common Criteria environmental
requirements, product should never be used
with wireless keyboards and mice.
5.
For security reasons and per NIAP and Common
Criteria environmental requirements, products
should never be connected to a microphone
input. Do not connect a microphone to the
product audio output port, including headsets
with microphone inputs. The KVM is designed to
prevent audio input signal flow.
6.
The Product is equipped with always-on active
anti- tampering system. Any attempt to open
the enclosure will activate the anti-tamper
trigger, indicated by all channel- select LEDs
flashing rapidly from one channel to the other.
In this case, product will be inoperable. If the
product’s anti-tamper evidence tape appears
disrupted or if all channel-select LEDs flash
continuously, remove product from service
immediately and contact technical support.
User Guidance & Precautions
Important: For change management tracking, it is advised to perform a quarterly log check to verify that administrator
accounts and log on events can be verified.
Содержание Secure KVM - NIAP PP4.0
Страница 15: ...LNKPG 00666 Rev B00 ...
