Belden Tofino Xenon, Руководство по установке

Страница: 34 / 52

34
Tofino Xenon Security Appliance Tofino SA
Release 06 09/2018
2.4.2 Wiring the digital input (optional)

Remove the terminal connector from the device.

Connect the wires according to the pin assignment on the device with the
clamps.

Fasten the wires connected by tightening the terminal screws.
2.5 Operating the device
Note: The torque for tightening the working voltage terminal block on the
device is 4.5 lb-in (0.51 Nm).
The torque for tightening the terminal block on the digital input of the device
is 3 lb-in (0.34 Nm).

Mount the terminal block for the supply voltage and the signal contact
using screws.

Enable the supply voltage.
Pin Signal, terminal Function
1 DI (+) Signal input
2 DI ( − ) Reference potential
Table 11: Pin assignment: 2 pin, screwable terminal block (on the left), connection
to the device (to the right)
WARNING
ELECTRIC SHOCK
Connect only a supply voltage that corresponds to the type plate of your
device.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.
2
1