Belden Tofino Xenon, Руководство по установке

Страница: 31 / 52

Tofino Xenon Security Appliance Tofino SA
Release 06 09/2018
31
2.3.1 Installing the device onto the DIN rail

Verify that there is at least 4 in (10 cm) of space above and below the
device.

Verify that there is at least 0.8 in (2 cm) of space on the right and left sides
of the device.
To mount the device onto a horizontally mounted 35 mm DIN rail according
to DIN EN 60715, proceed as follows:

Slide the upper snap-in guide of the device into the DIN rail.

Pull down the locking gate using a screwdriver and press the lower part
of the device against the DIN rail.

Snap in the device by releasing the locking gate.
2.3.2 Mounting on a vertical flat surface
You have the option of attaching the device to a vertical flat surface. This
requires a wall mounting plate, which you purchase as a separate accessory.
See “Accessories” on page 47.
The wall mounting plate comes without mounting hardware.

Obtain mounting hardware which is suitable for your requirements.
The wall mounting plate is provided with a Mounting Note that takes you
through the mounting procedure.

Follow the Mounting Note provided with the accessory.