Belden Tofino Xenon, Руководство по установке

Страница: 27 / 52

Tofino Xenon Security Appliance Tofino SA
Release 06 09/2018
27
1.8 Controls
The Tofino SA has a Save/Load/Reset (SLR) button (see table 6) .

Save/Load/Reset button SLR
The SLR button has the following functions:
 Saving diagnostic files and log files on the USB storage device

Loading configuration files from the USB storage device
 Factory resetting the device

To perform the functions, press the SLR button. The number of button
presses controls which function is carried out. Check your selection by
looking at the LEDs.
RESET Preparation
Reset process
yellow Lights up (5 s) The reset of the device to the factory
defaults is about to begin.
MODE
RESET Execution
Saving process green Flashing
alternately
in left to right
sequence
The device saves the diagnostic files or
log files on the USB device.
Execution
Loading process yellow Flashing
alternately
in right to left
sequence
The device loads the configuration files
from the USB device.
MODE
SAVE/
LOAD
RESET
FAULT Execution
Reset process Flashing
simultaneously
The reset of the device to the factory
defaults is in progress.
Button presses Chosen function LED behavior
1 Saving diagnostic files and log files on the USB
storage device The SAVE/LOAD
LED will
illuminatein green.
After a few
seconds
theMODE, SAVE/
LOAD, and
RESET LEDswill
flash in green in a
left to
rightsequence to
indicate the USB
Saveis in progress.
LED Display Color Activity Meaning