Belden Lumberg LioN-Link 0940 DSL 601, Техническое руководство

Страница: 17 / 27

Technical Manual
LioN-Link DeviceNet
Subject to change without notice! Version 1.0 / June 2010
Page 17 of 27
Switch to the folder
Module Configuration to insert the BusHead and the connected I/O-modules into the configuration.
First insert the BusHead 0940DSL601 into the slot 0. Add the connected I/O-modules to the following slots according to their
physical installation. Start with the first module at line 1 next to the BusHead. Then insert the subsequent I/O-Modules of line 1
followed by those of line 2. Observe the correct order of the I/O-modules.
In summation a maximum number of 16 I/O-modules can be connected to the BusHead. Both lines of the BusHead can be filled
with a maximum of 15 I/O-modules each.
The folder I/O Summary shows the number of input and ouput bytes that are required for the specific configuration in
dependance of the communication mode.