Page
8
of
100
OpEdge
Industrial Edge Gateway – Release 01.0.00 – 10/2022
2 Initial Configuration
This chapter covers the initial configuration of the OpEdge via the webpage. Once the OpEdge is
registered on Belden Horizon, the OpEdge can be maintained via Belden Horizon (See Chapter 3
for more details).
The initial configuration includes setting up the LAN port. These steps must be followed, even if
the OpEdge is going to be registered via Belden Horizon for cloud connectivity.
2.1 Connecting to the OpEdge Webpage
Perform the following steps to connect to the OpEdge webpage:
1
Ensure that the module is connected to the network to Ethernet port 1, and apply power to
the module.
NOTE:
The PC must be on the same subnet as the OpEdge’s default IP address settings.
2
Open a web browser and log in to the OpEdge configuration webpage. The default IP
address is:
https://192.168.0.250:8080
. If the PC is on a different subnet, temporarily set
the IP address of the PC to
192.168.0.xxx
with a subnet of
255.255.255.0
.
The login page is displayed.