Page
4
of
100
OpEdge
Industrial Edge Gateway – Release 01.0.00 – 10/2022
Open Source Information
Open Source Software used in the product
The product contains, among other things, Open Source Software files, as defined below, developed by third parties
and licensed under an Open Source Software license. These Open Source Software files are protected by copyright.
Your right to use the Open Source Software is governed by the relevant applicable Open Source Software license
conditions. Your compliance with those license conditions will entitle you to use the Open Source Software as foreseen
in the relevant license. In the event of conflicts between other Hirschmann Automation and Control GmbH license
conditions applicable to the product and the Open Source Software license conditions, the Open Source Software
conditions shall prevail. The Open Source Software is provided royalty-free (i.e. no fees are charged for exercising the
licensed rights). Information about used Open Source Software is available in the graphical user interface under Help (3
ellipses on top right) > License Information. You can find the Open Source Software and their respective licenses on
the DVD shipped with the product. For products shipped without DVD use the written offer (located in the graphical user
interface under Help > License Information) to request the DVD. The DVD contains the necessary elements and
instructions to rebuild your own version of the Open Source Software.
If Open Source Software contained in this product is licensed under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), Mozilla Public License (MPL) or any other Open Source Software license, which
requires that source code is to be made available and such source code is not already delivered together with the
product, you can order the corresponding source code of the Open Source Software from Hirschmann Automation and
Control GmbH - against payment of the shipping and handling charges - for a period of at least 3 years since purchase
of the product. Please send your specific request, within 3 years of the purchase date of this product, together with the
name and serial number of the product found on the product label to:
Hirschmann Automation and Control GmbH
Head of R&D
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Warranty regarding further use of the Open Source Software
Hirschmann Automation and Control GmbH provides no warranty for the Open Source Software contained in this
product, if such Open Source Software is used in any manner other than intended by Hirschmann Automation and
Control GmbH. The licenses listed below define the warranty, if any, from the authors or licensors of the Open Source
Software. Hirschmann Automation and Control GmbH specifically disclaims any warranty for defects caused by altering
any Open Source Software or the product’s configuration. Any warranty claims against Hirschmann Automation and
Control GmbH in the event that the Open Source Software contained in this product infringes the intellectual property
rights of a third party are excluded. The following disclaimer applies to the GPL and LGPL components in relation to the
rights holders:
“This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
and the GNU Lesser General Public License for more details.”
For the remaining open source components, the liability exclusions of the rights holders in the respective license texts
apply. Technical support, if any, will only be provided for unmodified software.