Belden Hirschmann MACH4002 Series, Руководство пользователя

Страница: 46 / 72

46
Installation MACH4002
Release 16 03/2021
Figure 17: Installing the media modules
1 - Step 1
2 - Step 2
3 - Step 3
Note: Note the “ESD Guidelines” on page 8 and “General safety instructions”
on page 7 ff.

Close the whole of the front surface beside the media modules with cover
panels. This provides optimal shielding and convection. The slots for the
media modules are all the same. They can be selected in any order.

Remove the cover panel from the media module slot on the basic device.

Note the positions of the blue insertion catches (see the figure above,
step 1).

Insert the media module almost as far as it will go into the desired slot (see
figure above, step 2).

Make sure that there is a good connection between the multiple plugs of
the media module and the female multipoints of the system bus.

Insert the media module as far as it will go into the desired slot by closing
the blue insertion catches (see figure above, step 3).

Screw the two knurled screws in the front panel of the media module flush
with the frame of the basic device.
2 3
1 1