Belden Hirschmann MACH4002 Series, Руководство пользователя

Страница: 7 / 72

Installation MACH4002
Release 16 03/2021
7
Safety instructions

General safety instructions
You operate this device with electricity. Improper usage of the device
entails the risk of physical injury or significant property damage. The
proper and safe operation of this device depends on proper handling
during transportation, proper storage and installation, and careful
operation and maintenance procedures.

Before connecting any cable, read this document, and the safety
instructions and warnings.

Operate the device with undamaged components exclusively.

The device is free of any service components. In case of a damaged
or malfunctioning device, turn off the supply voltage and return the
device to Hirschmann for inspection.

Qualification requirements for personnel

Only allow qualified personnel to work on the device.
Qualified personnel have the following characteristics:
 Qualified personnel are properly trained. Training as well as practical
knowledge and experience make up their qualifications. This is the
prerequisite for grounding and labeling circuits, devices, and systems
in accordance with current standards in safety technology.

Qualified personnel are aware of the dangers that exist in their work.

Qualified personnel are familiar with appropriate measures against
these hazards in order to reduce the risk for themselves and others.
 Qualified personnel receive training on a regular basis.

Certified usage
Use the device solely for the application cases described in the
Hirschmann product information, including this manual.
Operate the device solely according to the technical specifications.

National and international safety regulations
Verify that the electrical installation meets local or nationally applicable
safety regulations.

Supply voltage
Every time you connect the electrical conductors, make sure that the
following requirements are met:

Devices with DC power supply are designed for the operation with
Safety Extra Low Voltage. On the DC supply voltage connections,
exclusively connect PELV or SELV circuits according to IEC 60950-1
or ES1 circuits according to IEC/EN 62368-1.

The supply voltage complies with the description on the type plate of
your device.