36
MACH 100
Release 04 07/10
Port state
These LEDs display port-related information.
On the M1-8TP-RJ45 PoE media module, the left LED informs you about
data and link state, as shown in
table 5
. The right LED informs you about
PoE voltage supply on a port, as shown in
table 6
:
2.3
Basic set-up
The IP parameters must be entered when the device is installed for the first
time. The device provides 6 options for configuring IP addresses:
Entry via V.24 connection
Entry using the HiDiscovery protocol
Configuration via BOOTP
Configuration via DHCP
Configuration via DHCP Option 82
Auto Configuration Adapter
Further information on the basic settings of the device can be found in the
"Basic Configuration" user manual on the CD ROM.
Default settings
IP address: The device looks for the IP address using DHCP
Management password:
user, password: public (read only)
admin, password: private (read and write)
V.24 data rate: 9,600 Baud
Ring redundancy: off
Ethernet ports: link status is not evaluated (signal contact)
LS - data, link status (one green/yellow LED or one green and one yellow LED)
Not glowing
No valid connection.
Glowing green
Valid connection.
Flashing green (1 time a period) Port is switched to stand-by.
Flashing green (3 times a
period)
Port is switched off.
Flashing yellow
Data reception.
Table 5: Data, link status
PoE voltage supply
Not glowing
No PoE voltage on the port.
Glowing yellow
The port is supplied with PoE voltage.
Table 6: Activity of the right LED on the M1-8TP-RJ45 PoE media module
Содержание HIRSCHMANN M1-8MM-SXC
Страница 48: ......
