Belden HIRSCHMANN M1-8MM-SXC, Руководство пользователя

Страница: 22 / 48

22
MACH 100
Release 04 07/10

See the ESD guidelines on page 7 and the safety instructions on page 6
onwards.
The media modules are hot-plug-compatible, which means that you can
replace the modules with a module of the same kind during operation.
Note: If you are replacing media, e.g. removing a TX media module and
plugging in an FX media module in its place, the MACH 100 performs a warm
start.
Figure 10: MACH 100 device equipped with media modules
1 - Media module 1
2- Media module 2

To attach a media module, first remove the 2 screws on the protective
cover of the media module slot and remove the protective cover.

Plug the media module into the desired slot.

Fasten the 2 screws at the corners of the media module.

Fit the media modules in sequence from left to right.
2 1