Belden HIRSCHMANN M1-8MM-SXC, Руководство пользователя

Страница: 28 / 48

28
MACH 100
Release 04 07/10

Installing the MACH 100 on the wall

Use the pre-mounted brackets included in the delivery as shown in the
following figure
(see fig. 17) .

Attach two additional brackets to the device (see on page 44
„Accessories“ , not included in the delivery) as shown in the following
figure (see fig. 17) .

Fasten the device by screwing the brackets to the wall.
Warning
When installing the device, make sure the ventilation slots
remain unobstructed, as otherwise the device can overheat and
be damaged.
Figure 17: Vertical mounting on the wall
Note: The shielding ground of the connectable industrial twisted pair lines
is connected to the front panel as a conductor.

Grounding
The device is grounded via the voltage supply socket ( (see fig. 18) and
(see fig. 19) ).
2.1.7 Supply voltage
The input voltage range of the MACH 100 basic devices is designed as
100 - 240 VAC.
The power supply for the MACH 102-8TP-R, MACH 102-8TP-FR and MACH
102-24TP-FR devices is designed as redundant.