38
KAYENNE/KARRERA — Release Notes
Version 8.0
Deployment Archive Files
When new software versions are installed with the K-Frame Deployment
tool, older version deployment files are not automatically removed. Each
K-Frame deployment creates its own software version folder. If the default
installation location, or the same alternative destination, is always chosen,
all the version folders will be listed together.
Default destinations:
•
C:\Program Files (x86)\ Grass Valley \ GV Switcher \
K_Frame_Switcher_VX.X for 64-bit
•
C:\Program Files\ Grass Valley \ GV Switcher \ K_Frame_Switch-
er_VX.X for 32-bit systems.
Running the K_FrameInstaller.exe file in any version’s folder will permit
installation of that version’s files.
CAUTION
Before installing an older version of the Menu Panel application, you must
first un-install the newer, currently installed Menu Panel version, either using
that newer version’s K-Frame Deploy Tool or Windows Add/Remove Pro-
grams.
Note
All the components of a switcher system must run the same software ver-
sion. If you want to return to an earlier version of software, you should back-
down the software on the Video Processor Frame, all Control Panels, and all
Menu Panel applications used with that switcher system.
Calibrate the Kayenne Lever Arm and Joystick
It is recommended that the Kayenne Control Panel Lever Arm (for each
Transition Module) and Joystick be calibrated after a software update.
1.
Press and hold down the two left (
Exchange ME
/
Ptn Limit
) and two right
(
EMEM Run
/
Trans Rate
) buttons located just above the Lever Arm.
2.
Follow the instructions on the Transition Module status display to
calibrate the Lever Arm.
3.
From the Home menu in the Multi-Function Module, press
Panl
,
Cali
and follow the instructions on the status display to calibrate the
joystick.
