12
KAYENNE/KARRERA — Release Notes
Version 8.0
7.
On the MFM, press
EPin
and then the
Dlg
button directly below to turn
on Edge Pinning.
Figure 3. Multi-Function Module—2D-DPM Edge Pinning, EPin
8.
Press the
All
,
Top
,
Right
,
Left
, or
Bottom
button and use the soft knobs to pin
the edges to the cropped box; this allows very precise edge adjustment.
Adjusting the 2D-DPM with the Edge Pinning
All
soft knob acts similar
to a zoom.
9.
Turn off the View Thru Enable feature if enabled.
10.
Use the Pan and Scan features to reposition the shot clock if the camera
is moved.
Using Pan and Scan to Adjust a 2D-DPM Image with the Kayenne
Multi-Function Module
To ‘Pan’ a cropped image means to move the crop sideways which simul-
taneously trims the value of the Left Crop and Right Crop. To ‘Scan’ a
cropped image means to move the crop up and down, which simultane-
ously trims the Top Crop and Bottom Crop values.
1.
Press the
Crop
button to turn it on.
2.
Press the
All
button which toggles from
All
to
Pan
and
Scan
and choose
Pan
or
Scan
.
3.
Use the
Pan
or
Scan
soft knob to pan or scan until the image is correctly
placed in the cropped box.
