KAYENNE/KARRERA — Release Notes
33
Update the Kayenne/Karrera K-Frame Software
8.
When done, the Menu Successfully Installed screen appears, Click
Finish
.
If you installed onto Menu hardware you will be prompted to reboot
the computer.
Figure 31. K-Frame Menu Installer Success
9.
Click
Exit
and answer
Yes
to the prompt to exit the K-Frame Installer.
Clicking on the K-Frame Menu icon now launches the new version of the
Menu Panel application.
About Updating the HAD FPGA
Each CPU or Image Store board installed in a Grass Valley K-Frame Video
Processing Frame has a PCI Express endpoint for communication with the
host processor. These PCI endpoints are governed by the HAD FPGA. Soft-
ware updates can include firmware updates for these endpoint HADs.
For HAD FPGA update instructions, see the maintenance information in
the Installation & Service Manual for your switcher model.
CAUTION
It is recommended that HAD (Host Address Decoder) FPGA (Field Program-
mable Gate Array) updates are performed by qualified personnel only, i.e. an
EIC (Engineer In Charge).
Clear NV RAM for Control Panel and Frame
Use the following procedure on the Menu Panel or Menu on PC running
the Menu Panel application that operates with the updated Video Pro-
cessor Frame.
Figure 32. Switcher Menu Icon
