22
KAYENNE/KARRERA — Release Notes
Version 8.0
Figure 16. Telnet Debug Menu
5.
Enter the number fifteen [15] for the Flash HADs menu, at the prompt:
->15
Result:
Figure 17. Telnet Flash HADs Menu
6.
Enter the letter m [M] for the Multi Boot Configuration menu, at the
prompt:
->M
Result:
Figure 18. Telnet Multi Boot Configuration Menu
7.
Enter the letter Y to begin the reprogramming of the HADs, at the
prompt:
->Y
Result: HADs are being erased and programmed which
cannot
be seen
in the Telnet session, however results can be viewed in the K-Frame,
Frame Message Logs.
Note
After approximately seven minutes, the HAD programming results can be
seen in the K-Frame log files.
8.
Open an Internet Explorer window and enter the IP Address of the
Frame to display the K-Frame Web pages.
9.
Select
Frame Message Log
, then
Current
.
