Belden 1RU32LCD-BK-K, Руководство пользователя

Страница: 158 / 269

136
RollCall Templates
Operation
Operation
Monitor Port operation is done in Panel XY Mode. One or more Monitor Port buttons
need to be added to the panel button layout.
After a route has been made on a panel, then:
1 Press a Monitor Port button.
Tab. 5-39: Monitor Configuration Items
Item Description
Number Configured Monitor Buttons
Shows the number of monitor port buttons set up on
the panel.
Input Type: Radio buttons to select which router input signal type to
monitor:
Real Input • Select to monitor a router input signal.

(I.e. the actual input received by the router.)
Post PPIO • Select to monitor a router’s post-processing IO (PPIO) signal
(router dependent).
Post Processing • Select to monitor an internal router input signal following
any input audio processing (for video AHP router modules
only).
Output Type: Radio buttons to select which router output signal type
to monitor:
Pre-Processing • Select to monitor a routed signal in a router, before any
internal output audio processing.
Real Output • Select to monitor a router’s final output signal.
Tab. 5-40: Monitor Ports Items
Item Description
Monitor 1 to 20: Up to 20 Monitor Port button assignments can be made.
Note : Monitor buttons need to be added to a panel.
Matrix Index Slider.
Select the index number of the routing matrix by:
• moving the slider; or
• clicking on the value and entering a new vale and pressing
the Enter key.
Press P to set the default value.
Monitor Index Slider.
Select the index number of the selected routing matrix’s
monitor port by:
• moving the slider; or
• clicking on the value and entering a new vale and pressing
the Enter key.
Press P to set the default value.