Belden 1RU32LCD-BK-K Скачать руководство пользователя страница 48

Страница: 48 / 269

Hardware Description

Full Factory Reset

4 The panel now returns to its previous state but with a first level factory reset having

been carried out.

Full Factory Reset

The sequence of operations is similar for an LCD or an LED panel. In the description below,
an LCD panel is shown:

1 Using a suitable tool, press on the

Factory Reset

rear recessed push button and

continue to press it.

• The upper row of buttons in the block of 32 LCD or 40 LED front panel push buttons

illuminate

red

one by one from left to right.

• An LCD button (lower right on an LCD panel, upper right on an LED panel) displays

a count down, N, from 15 down to 0.



“

Reset IP addr in N

”

2 Continue to press the recessed button.

• The upper row illuminates white and then lower row of buttons illuminates red

from left to right (more slowly).

• The lower right LCD button displays a count down, N, from 15 down to 0.



“

Full Factory Reset in N

”

3 Continue pressing the Factory Reset button.

Содержание 1RU32LCD-BK-K














































































































































































































































































Результаты поиска

Содержание 1RU32LCD-BK-K

Отзывы:

Belden 1RU32LCD-BK-K, Руководство пользователя, Страница: 48 / 269

Результаты поиска

Содержание 1RU32LCD-BK-K

Отзывы: