Belden 1RU32LCD-BK-K, Руководство пользователя, Страница: 73 / 269

51
G2 Series 1U Router Control Panel
User Manual
Secondary: Secondary router controller information.
Enable
Secondary
Connection
Check box.
Note: Select this box to enable a second (secondary,
backup) router controller connection.
IP Address
Enter new IP address of the router controller.

Press S or the Enter key to locally-save the new value.
Default, factory setting: 192.168.1.3
Note: On LCD panels, the IP address can be checked
directly from the panel at any time by pressing any
three consecutive buttons on a row. See
Information
Display , on page 18.
RC Network
address RollCall network address for the router controller.
Default, factory setting: 0000:81:00
Setting is set to 0000:11:01 or 0000:81:00.
Setting is the same for both controllers for a dual-
controller system.
See Note 1 , Note 2 , and Note 3 below.
Connection Status Displays the status of the panel’s connection to the
router controller(s).
Values:
• Connect:Active
• Disconnected
TCP Port Sets TCP IP port number to use.
• For an IQ router this is 2050.
• For a router with a 24xx controller 2051 is normally used.
The user can select which port number is being used.
Caution: Changing TCP port number to any other
number may set the control panel off line.
Name Configuration Drop down list.
Select 8-character or 32-character source and
destination names to be used.
For example, for:
• source/destination displayed text on LCD panel buttons; and
• all
Status/Control RollCall templates.
Note: For this change to take effect, this requires the
panel to re-connect to the router controller.
Tab. 5-7: Router Connection Items (continued)
Router Connection Item Description