Belden 1RU32LCD-BK-K, Руководство пользователя, Страница: 82 / 269

60
RollCall Templates
Take / Undo / Gang Pane
BPX Mode: For the BPX panel mode:
Take Enable Check box.

Select to enable a Take function:

A Take button is displayed. It becomes active when a
new route is selected. Pressing Take then makes the
new route.
Note: If deselected, no Take functionality is employed
and new routes are made immediately upon selecting a
crosspoint.
Undo Enable Select to enable an Undo function and display an Undo
button.
ReTake / Redo
Enable Not used.
Routed Status Timer: After a route is made, the routed status may be
displayed for a set time if
Status button has been
defined on a panel. The status is shown on a Status
button.
Timeout Slider.
Set the
Take timeout value (seconds).

(Press P for the default of 6 seconds.)
When the value is set to ‘OFF’, the status is shown until
the next route is made.
Undo Timer: Displays the duration after which an Undo function will
timeout:
• an Undo button returns to being inactive;
• a Take button reverts to its ‘Take’ function.
Undo Timeout
Slider.
Set the
Undo timeout value.
(Press P for the default of ‘OFF’.)
Gang Take Mode XY panel mode only.
Gang Take mode allows a source to be selected first,
followed by one or more destinations. In this way, one
source may be routed to one or more destinations
simultaneously.
Note: A Take button must be enabled to use Gang Take
mode.
Radio buttons:
Disabled
Select to disable the Gang Take mode.
Active
Select to enable the Gang Take mode.
Tab. 5-10: (continued) Take / Undo Items (continued)
Take / Undo Item Description