Beko METPOINT BDL portable, Инструкция по установке и эксплуатации

Страница: 41 / 108

Operation BDL
METPOINT® BDL 41
14.2.2.2 Denoting the measuring data and determining the resolution of the decimal places
Note:
The resolution of the decimal places, short name and value name can be found below the tool button !
Tool button:
Main menu  Settings  Sensor settings  A1  Tool button
See Chapter 12.2.2.7 Marking and setting text fields
Important:
In the menu items
Main menu

Settings

Sensor settings and Main menu

Current values, the
value name is only indicated on the BDL standard version with four channels!
The short name is only used in these two menu items, for the BDL version with one or two
extension boards (eight or 12 channels).
14.2.2.3 Recording measuring data
Main menu  Settings  Sensor settings  A1  Recording button
Caution:
Prior to recording the selected measuring data, the data logger must be activated subsequent to the
completion of the settings
(see Chapter 12.2.3 Logger settings (data logger) .
For the value to be recorded, a name with
10 characters can be entered in order to
simplify its identification at a later moment in
the
menu items Graphics and
Graphics/current values .
Otherwise, the designation would be A1a ,
for example.
A1 is the channel name and a is the first
measured value in the channel, while b
would be the second, and c the third.
The resolution of the decimal places is easi-
ly adjustable by pressing right and left (0 to
5 decimal places).
With the recording buttons, the measuring
data are selected which will be stored at an
activated data logger .