Beko METPOINT BDL portable, Инструкция по установке и эксплуатации

Страница: 21 / 108

Connection of the sensors
METPOINT® BDL 21
11 Connection of the sensors
As regards consumption and dew point sensors, there is the possibility to provide the measured values as an
analog current signal 4 – 20 mA for further processing. In the connection diagrams, the collection of the
current signal for an external PLC/central control system or for an external display is explained.
SD21 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5
Connecting plug +U
v
Not used + I
OUT
Not used Not used
Connecting lead
4025252 (5 m)
Brown White
SD23 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6
Connecting plug +U
v
Not used Not used + I
OUT
-U
v
GND
Connecting lead
4025253 (5 m)
Brown White Blue Black
SP21/SP61 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5
Connecting plug +U
v
Not used + I
OUT
Not used Not used
Connecting lead
4025252 (5 m)
Brown Blue
SP22/SP62 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5
Connecting plug
+U
v
GND - U
v
- U
OUT
Not used
Connecting lead
Upon request
Brown Black Blue White
FS109/FS211/DP109 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5
Connecting plug SDI - U
v
+ U
v
+I (500 µA) Not used
Connecting lead
4014064 (5 m)
4014065 (10 m)
Brown White Blue Black Grey
The following connection diagrams apply from XA.1 to XC.4!
SD/DP series = dew point sensors
FS series = consumption sensors
SP series = pressure transducer