Beko METPOINT BDL portable, Инструкция по установке и эксплуатации

Страница: 58 / 108

Operation BDL
58 METPOINT® BDL
14.2.3.3 Modbus settings for the METPOINT
®
SD23
When connecting the METPOINT ® SD23 via Modbus, the following settings are required:
First step: select a free sensor channel
Main menu  Settings  Sensor settings  Select a free channel (example: channel A1)
Second step: select Modbus type
Main menu  Settings  Sensor settings  A1  Type text field  Select Modbus and confirm with
>OK<.
Third step: define a name
Main menu  Settings  Sensor settings  A1  Name text field
Now, a name needs to be entered.
Fourth step: define the Modbus settings
Main menu  Settings  Sensor settings  A1  Modbus settings
Note:
Further information regarding "Marking and setting text fields" can be found in Chapter Fehler!
Verweisquelle konnte nicht gefunden werden. .
The corresponding Modbus ID can be taken
from the data sheet of the sensor (here, for
example 1).
Adjust the other parameters according to the
illustration.