Installation and operating manual
EN
36
DRYPOINT
®
M eco control
2
1
1
1. Open the shut-off valve [2] of the bypass pipe.
2. Close the shut-off valves [1].
11
6
8
3. Hold the top part of the housing [11] tight,
screw the housing extension [8] off.
4. Remove housing extension [8].
NOTE
Proper disposal!
Inappropriate disposal of parts and
components, operating and auxiliary
materials as well as cleaning media can
cause environmental damage.
• Dispose of all parts and components,
operating and auxiliary materials as
well as cleaning media professionally
and in accordance with regional
legal provisions, regulations and
requirements.
• In case of uncertainties regarding
disposal, always consult a regional
waste management company.
5. Remove the filter element [6] from the housing [11].
6. Dispose of used filter element [6] properly.
For additional information refer to “6. Dismantling and disposal”,
on Page 32.
6
7. Insert the new filter element [6] into the housing.
