21
2.1
Description
2.1.1
Initialisation & loss of power
2.1.2
Controls
2.1.3
Displays
2.2
System certificates
2.3
Use with Zener barriers
2.3.1
Power supply
2.3.2
Input
2.3.3
Resetting the total display
2.3.4
Options
2.4
Use with galvanic isolators
2.4.1
Power supply
2.4.2
Input
2.4.3
Resetting the total display
2.4.4
Options
2.5
Programming
2.5.1
Accessing programme functions
2.5.2
Function of instrument
2.5.3
Type of input
2.5.4
Input count mode
2.5.5
Counting edge
2.5.6
Position of decimal point(s)
2.5.7
Lower display
2.5.8
Total scale factor
2.5.9
Rate scale factor
2.5.10 Rate display filter
2.5.11 Timebase
2.5.12 Direction of count
2.5.13 Reset
value
2.5.14 Local
reset
2.5.15 Resetting grand total
2.5.16 Security
code
2.6
Optional Alarms
2.6.1
Programming and adjustment
2.6.2
Alarm enable
2.6.3
Type of alarm
2.6.4
Setpoint adjustment
2.6.5
Alarm function
2.6.6
Alarm output status
2.6.7
Hysteresis
2.6.8
Alarm delay
2.6.9
Alarm silence time
2.6.10 Access setpoint
2.6.11 Adjusting setpoints from display
mode.
2.7
Optional 4/20mA output
2.7.1
Programming & adjustment
2.8
Optional pulse output
2.8.1
Programming & adjustment
2.9
Calibration example
2.10
Maintenance
2.10.1 Fault finding during commissioning.
2.10.2 Fault finding after commissioning.
2.11
Index for Counter section
Section 2
Use as a Counter
