85
5.5 PROGRAMMING
Throughout this manual push-buttons are shown
in italics e.g.
P
or
Up
push-button, and legends
displayed by the instrument are shown within
inverted commas e.g. 'SEt' and ' dISPLAY'.
5.5.1 Accessing programme functions
Access to the programme menu is obtained by
operating the
P
and
E
push-buttons
simultaneously. If the BA364D is not protected
by a security code the first parameter ‘Function’
will be displayed. If a security code other than
the default code 0000 has already been entered,
the instrument will display 'COdE'. Press
P
to
clear this prompt and enter the security code for
the instrument using the
Up
or
Down
push-button
to adjust each digit, and the
P
push-button to
move control to the next digit. If the correct code
has been entered pressing
E
will cause the first
parameter ‘Function’ to be displayed. If an
incorrect code is entered, or a push-button is not
operated within ten seconds, the instrument will
automatically return to the display mode.
Once within the main programme menu the
required parameter can be reached by scrolling
through the menu using the
Up
and
Down
push-
buttons as shown by the clock programme
structure shown in Fig 5.3.
This section summarises all the clock
programmable parameters including those for the
optional control outputs. When read in
conjunction with Fig 5.3 it provides a quick aid for
programming the instrument. If more detail is
required, each section contains a reference to a
full description of the function.
SUMMARY OF PROGRAMME FUNCTIONS
Display
Description of function
‘Function’ Function of instrument
Enables the BA364D to be
conditioned as a counter, timer,
tachometer or clock. After making
the selection ‘SurE’ has to be
entered to confirm the instruction
Select ‘CLOC’ to enable the clock
functions.
See section 5.5.2
'dISPLAY'
Display format and units
Allows a 12 or 24 hour clock
display to be selected with or
without seconds
Select:
12:00
for 12 hours without seconds
12:00:00 for 12 hours with seconds
24:00
for 24 hours without seconds
24:00:00 for 24 hours with seconds
See section 5.5.3
‘SEt’
Set display time
Enables the displayed time to be
adjusted, the clock resumes
operating when the SEt menu is
exited.
See section 5.5.4
‘rSEt t’
Set reset time
Enables the reset time to be
adjusted so that the BA364D can
be synchronised with an external
master clock.
See section 5.5.5
'COdE' Security code
Defines a four digit numeric code
that must be entered to gain
access to the programmable
functions. Default code 0000
disables the security function and
allows unrestricted access to all
programmable functions.
See section 5.5.6
