86
Display
Description of function
'EnbL'
Control output enable *
Allows one or two switching cycles
per 24 hours to be selected or the
optional control output to be
disabled.
See section 5.5.7
'OP1:On1' Setpoint *
Defines the time at which control
output 1 turns on for the first time.
See section 5.5.8
'OP1:OFF1' Setpoint *
Defines the time at which control
output 1 turns off for the first time.
See section 5.5.8
'OP1:On2' Setpoint *
Defines the time at which control
output 1 turns on for the second
time.
See section 5.5.8
'OP1:OFF2' Setpoint *
Defines the time at which control
output 1 turns off for the second
time.
See section 5.5.8
'AcSP'
Access setpoint *
Sub-menu that enables direct
access to the alarm setpoints from
the display mode and defines a
separate security code.
See section 5.5.9
Note:
Functions marked with an asterisk
* are only included when the
optional control outputs are fitted.
