BEINAT BXI32, Инструкция по установке и эксплуатации

Страница: 11 / 24

This chapter requires special attention because all anomalies that occurred during the operation
of the entire system are recorded.
In fact, all the events of safety and general failures are stored in the Datalogger, including network blackouts,
digital transmission or reception errors, battery operation or discharge, etc.
See the table below.
All data are saved with codes, each code corresponds to an event.
Scroll through the pages with the UP and
DOWN buttons by selecting them for 1 or 10
using the arrows you like, press "ENTER"
- Event 01 -
25 May/19 10:10
E01-s01
FAULT DATE
PROGRESSIVE NUMBER
FAULT TIME
ERROR CODE
Event type Codice
1 Pre-alarm E00-S01
2 Alarm E01-S01
3 Generic sensor fault E02-S01
4 Black Out E03-C00
5 Network Restore E04-C00
6 Low Battery E05-C00
7 Reset E06-C00
8 Sensor communication error E07-C00
9 Enabled sensor E08-S01
10 Disabled sensor E09-S01
11 Hardware Reset E10-C00
12 Battery Clock E11-C00
13 Sensor not present E12-C00
14 Fault sensor E13-S01
15 Sensor expired E14-S01
16 Sensor replacement E15-S01
17 Central Communication Error E16-S01
Use the UP and DOWN buttons to select the written:
a) Print status, press “ENTER”.
The current status of the control unit and sensors.
b) Print Datalogger, press “ENTER”
All datalogger events
Page 11
STAMPA STATO ATTUALE ED EVENTI DEL DATALOGGER

EXIT
BEINAT
== BXI32 ==
Ver: 1.14 S/N Example
Serial:
0102
Date Hour
31/MAY/17 10:00
Datalogger
------ ----------- ------
- Event 01 -
06/jun/2019 08:27
Reset
------------ ------------
- Event 02 -
07/jun/2019 10:11
Hard Reset
------------ ------------
- Event 03 -
07/jun/2019 10:27
Vbat=11.8V
------ ---------- ------
Until the completion
BEINAT
== BXI32 ==
Ver: 1.14 S/N Example
Serial:
0102
Date Hour
31/MAY/17 10:00
Sensors Status
------------- ------------
Sensor 01 Zone 1
Gas Type: Explosive
Gas Level: 02.9 LEL
Status: Normal
------------- ------------
Sensor 02 Zone 1
Disabled
------------ ------------
Sensor 03 Zone 1
Disabled
------------- ------------
Until the completion
SCONTRINO STAUS SCONTRINO DATALOGGER
Down
UP
Left
Right
ENTER

Indicator to return to the previous page, use "UP" and "DOWN"
keys and press "ENTER"
Indicator to advance to the
ALARM THRESHOLD SELECTION
page, use
"UP" and "DOWN" keys and press "ENTER"
Indicator to exit the program, use "UP" and "DOWN" keys and
press "ENTER"
Advanced Functions
Reading Datalogger (events)
Retrocession pag. x1
Retrocession pag. x10
Advancement pag. x1
R
EADING EXAMPLES
Print status
Print Datalogger
