Page 6
a) Pre-alarm programming of each sensor
If necessary, the Pre-Alarm Threshold can be changed
Select with the "DOWN?" the arrow at the bottom rightand
press "ENTER"
follows
b) Programming of the alarm threshold of each
s en s o r
Manual enabling of each sensor
1) Press the "right - left" button to move the cursor to the
first asterisk on, at the same time shows the words
"SENSORS: 01" and the serial number 491940 of the
sensor in question
press “ENTER” ..... Continue like this for all the sensors.
Manual disabling of each sensor
To disable the sensor, use the "DX - SX" key when the
cursor is positioned on the probe in question
press “ENTER” ..... Continue like this for all the sensors.
N.B. when you find the "hashtag" synbol means that are inserted the CARD-
TX4R; in this case you cannot insert the sensor.
Saving the enablement
To save the sensors enabling you must select with the
buttons the arrow at the top left and press "ENTER"
Leaving everything stationary for three minutes,
the saving is automatic.
Down
UP
Left
Right
ENTER
Detection sensors
Input settings
Sensors
Expansion Card
Selectio n
To the contro lle r y ou can associate t he f ollowing
connections:
1) connections up to 32 sensors
2) connections up to 31 sensors and a CARD-TX4R
3) connections up to 30 sensors and two CARD-TX4R
To do this you need to acquire the both the sensors that the
CA R D.
Use the "UP" and “DOWN" buttons to select the desired
function, press "ENTER"
Enabling detection sensors
At the first test we will find on the screen as many asterisks
as many sensors are connected, and many hyphens for
unconnected sensors.
Quick enable or disable of all sensors.
Enabling hold the "Up" button for a few seconds.
Disabling hold the "Down" button for a few seconds.
* - * * * * * * * - * * - * *
* * * - * * * * * - * * - * *
*
* * * - * * * * * - * * - * *
*
Enabling sensors
Detection Sensors Acquisition
Waiting! The duration is about max. 40 seconds
Sensors Acquisition
sensors acquisition !
< . . . . . . . . . . . . . . . .>
Legen d
* Sensor detected
- Sensor not detected (free address)
“E” Sensor for explosive gas
“T” Sensor for toxic gas
"O" sensor enabled for oxygen gas
* * * * * * * * * * * * * * *
sensors: 01 491940
- - - * - * - - - - - - - * -
-
- - - * - * - - - - - - - * #
#
Enabling sensors
* * * * * * * * * * * * * * *
sensors: 01 491940
- - - * - * - - - - - - - * -
-
- - - * - * - - - - - - - * -
-
Enabling sensors
E
T
