Beijer Electronics korenix JetWave 3220v3 Series, Руководство пользователя

Страница: 94 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 85
Config Changed: The configuration of the AP/Gateway is changed event.
SNMP Settings:
Protocol Version: Select the SNMP version, the product supports SNMP V1, V2c and V3. While
selecting the SNMPv3, continue to configure the SNMPv3 User Name and Encryption in lower
screen.
Server Port: Change the server port for a service if needed; however you have to use the same
port to use that service for remote management.
Get Community: Specify the community name (password) for the incoming SNMP_Get and
SNMP_GetNext requests from the management station. By default, it is set to public and allows
all requests.
Set Community: Specify the community name (password) for the incoming SNMP_Set requests
from the management station. By default, it is set to private.
Trap Destination: Specify the IP address of the station to send the SNMP traps to.
Trap Community: Specify the community name (password) sent with each trap to the manager.
By default, it is set to public and allows all requests.
Note: For security concern, it is recommended change the Community Name before you
connect the AP/Gateway to the network. The experience engineer who familiar with SNMP
protocol can easily discovery and change the configuration of the AP/Gateway through SNMP
once you use the default communication name.