Beijer Electronics korenix JetWave 3220v3 Series, Руководство пользователя

Страница: 61 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 52
IP Address: The IP Address field allows you to set the device’s WAN IP address manually.
Subnet Mask: This is the subnet mask address for your WAN interface. Set the IP subnet mask
manually.
DHCP Server: Enabled / Disabled
DHCP Server Setting:
In Router mode, you can enable DHCP Server to assign IP address to DHCP clients. And you
should define the address pool by configuring the Start IP and End IP. DHCP server will allocate
IP address dynamically from the pool. The device allows you to assign up to one Class C, 255
IP Addresses. Since the maximum connection session is 64, configuring 64 IP addresses is
enough for the need.
You can also configure the Subnet Mask, DHCP Gateway, WIS, Primary/Secondary DNS
Server s’ IP Address and Least Time of the assigned IP addresses.
Enable DHCP Relay:
If you already have DHCP server in other subnet, you can “ Disable” DHCP Server and then