Beijer Electronics korenix JetWave 3220v3 Series, Руководство пользователя

Страница: 82 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 73
4.2.3
Wireless Advanced Setting
The page allows you to configure advanced wireless setting. These settings are only for more
technically advanced users who have a sufficient knowledge about wireless LAN. Some of these
settings should not be changed unless you know what effect the changes will take. And some of
the modification on them may negatively impact the performance of your wireless network.
A-MPDU/A-MSDU Aggregation: Under AP mode, the data rate of your AP could be enhanced
greatly with this option enabled; however, if your wireless clients don’t support A-MPDU/A-MSDU
aggregation, it is recommended not to enable it.
Short GI: Under 802.11ac mode, enable it (Short Guard Interval) to obtain better data rate if there
is no negative compatibility issue.
RTS Threshold: The AP/Gateway sends RTS (Request to Send) frames to certain receiving
station and negotiates the sending of a data frame. After receiving an RTS, that STA responds with
a CTS (Clear to Send) frame to acknowledge the right to start transmission. The setting range is
0 to 2347 in byte.
Fragmentation Threshold: Specify the maximum size in byte for a packet before data is
fragmented into multiple packets. Setting it too low may result in poor network performance. Leave