Beijer Electronics korenix JetWave 3220v3 Series, Руководство пользователя

Страница: 122 / 141

JetWave 3220v3/3420v3 Series User Manual
Page 113
5.2
Command Line Interface (CLI)
The AP/Gateway provides the Command Line Interface (CLI), you can access it through the
console or Telnet. The Command Line Interface (CLI) is the user interface to the AP/Gateway’s
embedded software system. You can view the system information, show the status, configure the
switch and receive a response back from the system by keying in a command.
The below screen is the login screen of the AP/Gateway. The default username/password is
admin/admin, it is the same as Web GUI. Once you modified it from other configuration interface,
please type the new name/password to login.
There are some different command sets. Each command sets has its own access ability and
available command lines. These command sets are:
SHOW: This is Read Only command to show the current setting and status of the AP/Gateway.
SET: This is Write command to change the current setting.
LIST: This is Help command to show the usage information of the command.
Del: This is Delete command to delete the applied settings.
Exit: To exit the CLI. It is logout command.
Note: Use “Tab
↹
” key can help you find the correct command and complete the command no
matter you want to Read or Write easier.