Operating Instructions
HBP530A-CNC
BA85308
Status 46/04
Rev 07.02.11
Page 20
5 B
EHRINGER
Terminal BT - 41
5.1
Terminal description
The BEHRINGER BT-41 terminal controls the entire machine and allows the machine
specific data (machine constants), and the power parameters for the sawing process to be
programmed.
Additionally, faults are displayed on screen with descriptions to inform the operator of the
machine status. Fault messages are shown independent of the present procedure.
The start-up mask appears when the machine is initially switched on. Simultaneously the
control unit performs a self-check. After the self-check of the control unit, a light bulb test is
performed and the main menu appears on the screen. The machine is now ready for
operation.
