32
OUTDOOR INSTALLATION INSTRUCTIONS
OUTDOOR INSTALLATION INSTRUCTIONS
WARNING
WARNING
Contact your local municipality for any building codes
regulating the installation of outdoor barbecue appliances.
Outdoor installations must conform to local codes or, in the
absence of local codes, with the following.
We recommend that this installation be done in a masonry
structure and carried out by a professional tradesperson.
Other non-combustible material such as Hardiplank,
Villaboard with metal studs may also be used.
This appliance must not be installed under or on
any combustible material. Minimum clearance from
combustible construction materials to all sides of the
appliance is 450mm. Australian Standards Code AS: 5601
WARNING
WARNING
When using an LPG/Propane supply system in an enclosure,
ventilation must be provided. Gas vapour is highly explosive
and can cause serious bodily injury or damage to property if
allowed to accumulate in a confined space and ignited.
500mm min
230mm min
AGA approved
propane
regulator (not
included)
QCC LPG
Cylinder (not
included)
Stainless steel flex line or AGA
approved hose (not included)
Shut off valve (not included)
AGA approved Natural Gas
regulator
Typical installation drawing
Propane (LPG) Installation
Natural gas installation
20mm min rear
clearance
Installing the Inbuilt Side Burner
This appliance can only be installed in an enclosure
constructed of non combustible material�
1� Determine the position of the cutout for the side
burner using the diagram shown on this page�
2� Ensure that no gas, electricity or any other services
run near the position of the cutout�
3� Depending on the depth of the bench into which the
side burner is being installed, it may be necessary to
connect the gas hoses to the side burner first�
4� Secure the side burner by drilling through the
mounting plate�
360mm
507mm
412mm
45mm
50mm
70mm
70mm
220mm
Содержание signature plus
Страница 34: ...34 NOTES NOTES ...