background image

21

OPERATING INSTRUCTIONS 

OPERATING INSTRUCTIONS

Operation of the optional side burner
Lighting

1�    Check the control knob is in the Off position and ensure 

the gas line is properly connected�

2�    Raise the lid and check that the burner and burner cap 

are in the correct position�

3�    Press and turn the control knob slowly (3-4 seconds) in 

a counter - clockwise direction to the High position until 

a click is heard� When the burner is alight, select your 

desired heat setting� A low flame or simmer condition  

is obtained by turning the control knob anti-clockwise  

to Low�

4�    If the burner fails to ignite, turn the control knob to Off, 

wait 5 minutes and repeat the lighting procedure�

After Use

1�    Turn the control knob to the Off position and turn the 

gas cylinder valve off when the barbecue is not in use�

2�   Clean off any food spills and then close the lid�

WARNING

WARNING

When using the side burner ensure that any handle fitted to 

a wok, pot or pan is positioned so that it is out of reach  

of children.

WARNING

WARNING

Safety with woks and pots and pans
When using a wok, pot or pan on the side burner ensure 

that any handle is positioned so that it is out of reach of 

children. Long handles protruding out beyond the side 

burner can be dangerous. Keep children away from the 

appliance when it is operating. Never leave an operating 

barbecue unattended.

Low

High

Off

Always open 

lid before 

lighting�  

Do no close  

lid while 

burner is 

alight�

Long handles 

protruding 

out beyond 

the side 

burner can be 

dangerous�

Содержание signature plus





































Отзывы: